 |
|
1/4" Stamped Overlayment Floor Coating Installation Specifications
|
We are pleased to quote the following cost for the preparation and coating of your concrete floor area.
|
|
SURFACE PREPARATION
|
- Acid etch and power wash.
|
|
COATING SYSTEM
|
PRIME - Performance thin finish base coat.
INTERMEDIATE 1 - Performance thin finish bond coat.
INTERMEDIATE 2 - Performance 1\4" texture pave colored throughout.
FINISH 1 - Multi coats of various ultra stone concrete stains (approx. 3-5 coats).
FINISH 2 - Performance methacrylate base sealer.
FINISH 3 - Performance methacrylate base sealer.
FINISH 4 - Performance methacrylate base sealer with shark grip slip resistant additive 1\4".
|
|
CRACK\EXPANSION JOINT\HOLE FILLING (INCLUDED)
|
We will fill the cracks and expansion joints with Performance Crack and Joint Filler.
|
|
NON-SKID ADDITIVE (INCLUDED)
|
White aluminum oxide non-skid additive will be broadcast into the floor.
|
|
ADDITIONAL CHARGES
|
There is an additional charge for each separate mobilization to complete the job (requested by customer), to be determined.
|
|
PAYMENT TERMS
|
- ONE HALF UPON SIGN UP
- BALANCE UPON FINAL COMPLETION
|
WARRANTY
PERFORMANCE FLOOR COATING SYSTEMS, INC. (PFCS) SHALL WARRANTY ITS WORK AGAINST FLAKING AND PEELING FOR A PERIOD OF ONE YEAR FROM THE INVOICE DATE PROVIDING THE JOB HAS BEEN PAID IN FULL TO TERMS. PFCS CANNOT WARRANTY AN EXISTING COATING ADHESION TO THE CONCRETE OR ANY WORK THAT WE HAVE NOT PERFORMED. THIS WARRANTY APPLIES TO FLAKING OR CHIPPING COATINGS CAUSED AS A DIRECT RESULT OF PRODUCT FAILURE. THE SOLE AND EXCLUSIVE MAXIMUM LIABILITY OF PFCS UNDER THIS WARRANTY WILL BE AT THE OPTION OF PFCS, TO PATCH FAILING AREA(S) OR RECOAT ALL COATED AREAS PFCS DEEMS ADVISABLE.
THE EXPRESS WARRANTIES SET FORTH IN THIS CONTRACT ARE IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, WITHOUT LIMITATION, ANY WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
CUSTOMER AGREES THAT ITS EXCLUSIVE REMEDIES, AND THE ENTIRE LIABILITY OF PFCS WITH RESPECT TO THE SPECIFIED FLOOR COATINGS, ARE SET FORTH IN THIS AGREEMENT. PFCS WILL NOT BE LIABLE TO CUSTOMER FOR ANY DAMAGES, INCLUDING ANY LOST PROFITS OR OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OR ITS USE OF THE FLOOR COATING OR THE BREACH OF ANY WARRANTY.
CONDITIONS NOT WARRANTED
Hydrostatic pressure (Hydrostatic pressure is caused from moisture being present underneath the concrete slab. Hydrostatic pressure can cause blisters, bubbles and other effects in a resinous coating).
Sub-surface contaminants (Oil or other contaminants that can come up from within the concrete slab) could cause coating failure.
Deficient Concrete (concrete that breaks apart) and exhibits reduced integrity.
Non-skid will wear out over time and will need to be re-applied. Performance accepts no responsibility as to the time or amount of wearing. The customer is responsible to maintain its own safe limits for slip resistance throughout the life of the floor coating application. PFCS recommends a coefficient friction of .05 or greater.
1/4" stamped overlayments have a three year warranty, quartz systems have a two year warranty.
|
|
|
|
