Epoxy Flooring Sales and Service

Performance Floor Residential Flooring Services


Garages / Driveways / Basements / Patios / Walkways / Pool Decks

Allow the professionals at Performance Floor Coating Systems Inc. to create the ultimate showplace for your concrete floors. With millions of concrete applications under our belt, we have the experience to install any type of decorative system. A wide variety of systems are available from:
Residential epoxy garage floor coating
  • Epoxy system specifications     Epoxy Coat epoxy floor coating system specifications

  • Standard flake system specifications     Standard flake system specifications

  • Simulated Terrazzo system specifications     Standard flake system specifications

  • Quartz floor specifications     Quartz floor specifications

  • Stain system specifications     Stain system specifications

  • Micro stamped overlayment system specifications     Micro stamped overlayment system specifications

  • 1/4" overlayment stamped specifications     1/4 overlayment stamped specifications

  • Concrete polishing specifications     Concrete polishing specifications

  • 1/4" overlayment epoxy specifications     1/4 overlayment epoxy specifications


Standard Epoxy Floor Coating Installation Specifications
Solid Epoxy system specifications
We are pleased to quote the following cost for the preparation and coating of your concrete floor area.

SURFACE PREPARATION
  1. Entire new area to be diamond ground and/or shotblasted with a Blastrac shotblasting machine. The Blastrac shotblasting machine is designed to specifically reduce noticeable blast lines where other blasting equipment is not designed to do so. All coated area will be sanded and/or diamond ground prior to coating. Entire area to be magnetically swept to remove all spent shot.

  2. Entire wall area to be hand ground.

  3. Entire area to be swept and/or power blown prior to coating.
COATING SYSTEM THICKNESS
Performance Epoxy-Coat High Wear Chemical Resistant Cycloaliphatic Epoxy 20 mils DFT (10 coats of normal paint in thickness)

OPTIONAL INSTALLATION SERVICES (Commercial Use)
AISLE STRIPING - If you desire, we propose to tape off the floor and apply 20 mils of Performance Epoxy-Coat High Wear Chemical Resistant Cycloaliphatic Epoxy Safety Yellow at an additional cost of $1.20 per linear ft. with a minimum of $300.00.

ADDITIONAL CHARGES
There is an additional charge for each separate mobilization to complete the job (requested by customer), to be determined.

PAYMENT TERMS
  • ONE HALF UPON SIGN UP
  • BALANCE UPON FINAL COMPLETION


NOTE: Specified above is the best form (Cycloaliphatic Epoxy) of 100% solids epoxy for floor coating. This product will wear longer, offer better chemical resistance, resist yellowing better, resists sweating and cure harder than polyamide, aliphatic, amido-amine, etc. epoxies which have less performance qualities. To compare our Epoxy-Coat with substandard products is not a fair comparison. Although we use to sell lesser quality epoxies for customers self installations, we will not install nor warranty them any longer. We estimate the costs and value at $.12 square foot additional dollar value for this type of epoxy over other substandard epoxy installations.

WARRANTY GET QUOTE NOW BACK

Standard Flake Chip Epoxy Floor Coating Installation Specifications
Solid Epoxy Flake system specifications
We are pleased to quote the following cost for the preparation and coating of your concrete floor area.

SURFACE PREPARATION
  1. Entire new area to be diamond ground and/or shotblasted with a Blastrac shotblasting machine. The Blastrac shotblasting machine is designed to specifically reduce noticeable blast lines where other blasting equipment is not designed to do so. All coated area will be sanded and/or diamond ground prior to coating. Entire area to be magnetically swept to remove all spent shot.

  2. Entire wall area to be hand ground.

  3. Entire area to be swept and/or power blown prior to coating.
COATING SYSTEM
Performance Epoxy-Coat High Wear Chemical Resistant Cycloaliphatic Epoxy 20 mils DFT (10 coats of normal paint in thickness)

Colored chip flakes will be added to floor.

CRACK\EXPANSION JOINT\HOLE FILLING (INCLUDED)
We will fill the cracks and expansion joints with Performance Crack and Joint Filler.

NOTE: Some competitors will not add Non-Skid additive in their quote but make it an extra. Performance makes this a standard due to the fact that it will give you a safer floor system. We estimate the costs and value at $.03 square foot additional dollar value for this addition over other standard epoxy installations.

OPTIONAL INSTALLATION SERVICES (Commercial Use)
AISLE STRIPING - If you desire, we propose to tape off the floor and apply 20 mils of Performance Epoxy-Coat High Wear Chemical Resistant Cycloaliphatic Epoxy Safety Yellow at an additional cost of $1.20 per linear ft. with a minimum of $300.00.

ADDITIONAL CHARGES
There is an additional charge for each separate mobilization to complete the job (requested by customer), to be determined.

PAYMENT TERMS
  • ONE HALF UPON SIGN UP
  • BALANCE UPON FINAL COMPLETION


NOTE: Specified above is the best form (Cycloaliphatic Epoxy) of 100% solids epoxy for floor coating. This product will wear longer, offer better chemical resistance, resist yellowing better, resists sweating and cure harder than polyamide, aliphatic, amido-amine, etc. epoxies which have less performance qualities. To compare our Epoxy-Coat with substandard products is not a fair comparison. Although we use to sell lesser quality epoxies for customers self installations, we will not install nor warranty them any longer. We estimate the costs and value at $.12 square foot additional dollar value for this type of epoxy over other substandard epoxy installations.

WARRANTY GET QUOTE NOW BACK

Simulated Terrazzo Flake Chip Epoxy Floor Coating Installation Specifications
Simulated Terrazzo system specifications
We are pleased to quote the following cost for the preparation and coating of your concrete floor area.

SURFACE PREPARATION
  1. Entire new area to be diamond ground and/or shot blasted with a Blastrac shot blasting machine. The Blastrac shot blasting machine is designed to specifically reduce noticeable blast lines where other blasting equipment is not designed to do so. All coated area will be sanded and/or diamond ground prior to coating. Entire area to be magnetically swept to remove all spent shot.

  2. Entire wall area to be hand ground.

  3. Entire area to be swept and/or power blown prior to coating.
COATING SYSTEM
Prime: Performance Epoxy-Coat High Wear Chemical Resistant Cycloaliphatic Epoxy with flake chips broadcast to excess.

Finish: Performance Epoxy-Coat High Wear Chemical Resistant Cycloaliphatic Epoxy Clear 80 mils DFT (40 coats of normal paint in thickness).

Colored chip flakes will be added to floor. Finish to match customers desire for slip resistance and surface appearance.

CRACK\EXPANSION JOINT\HOLE FILLING (INCLUDED)
We will fill the cracks and expansion joints with Performance Crack and Joint Filler.

NOTE: Some competitors will not add Non-Skid additive in their quote but make it an extra. Performance makes this a standard due to the fact that it will give you a safer floor system. We estimate the costs and value at $.03 square foot additional dollar value for this addition over other standard epoxy installations.

OPTIONAL INSTALLATION SERVICES (Commercial Use)
AISLE STRIPING - If you desire, we propose to tape off the floor and apply 20 mils of Performance Epoxy-Coat High Wear Chemical Resistant Cycloaliphatic Epoxy Safety Yellow at an additional cost of $1.20 per linear ft. with a minimum of $300.00.

ADDITIONAL CHARGES
There is an additional charge for each separate mobilization to complete the job (requested by customer), to be determined.

PAYMENT TERMS
  • ONE HALF UPON SIGN UP
  • BALANCE UPON FINAL COMPLETION


NOTE: Specified above is the best form (Cycloaliphatic Epoxy) of 100% solids epoxy for floor coating. This product will wear longer, offer better chemical resistance, resist yellowing better, resists sweating and cure harder than polyamide, aliphatic, amido-amine, etc. epoxies which have less performance qualities. To compare our Epoxy-Coat with substandard products is not a fair comparison. Although we use to sell lesser quality epoxies for customers self installations, we will not install nor warranty them any longer. We estimate the costs and value at $.12 square foot additional dollar value for this type of epoxy over other substandard epoxy installations.

WARRANTY GET QUOTE NOW BACK

Quartz Epoxy Floor Coating Installation Specifications
"2 Year Limited Warranty"
Quartz Epoxy Floor Coatings
We are pleased to quote the following cost for the preparation and coating of your concrete floor area.

SURFACE PREPARATION
  1. Entire new area to be diamond ground and/or shotblasted with a Blastrac shotblasting machine. The Blastrac shotblasting machine is designed to specifically reduce noticeable blast lines where other blasting equipment is not designed to do so. All coated area will be sanded and/or diamond ground prior to coating. Entire area to be magnetically swept to remove all spent shot.

  2. Entire wall area to be hand ground.

  3. Entire area to be swept and/or power blown prior to coating.
COATING SYSTEM
PRIME - Performance E-300P 100% epoxy primer with quartz broadcast

INTERMEDIATE - Performance E-300 100% solids epoxy with quartz broadcast will be added to floor.

FINISH - Performance Epoxy-Coat High Wear Chemical Resistant Epoxy Clear 3\32"

OPTIONAL: 2"- 6" quartz cove base.

CRACK\EXPANSION JOINT\HOLE FILLING (INCLUDED)
We will fill the cracks and expansion joints with Performance Crack and Joint Filler.

NOTE: Most competitors will not add crack\expansion joint\hole filling in their quote but make it an extra. Performance makes this a standard due to the fact that it will give you a better flooring system with a monolithic look. Cracks, expansion joints, and holes are more noticeable with a high gloss application. Debris will also imbed itself into these crevices if not patched. Please note that with the movement of concrete some cracks may re-appear (especially in expansion joints) but the coating will not peel from those areas and the crack usually are much less noticeable in these instances. We estimate the costs and value at $.11 square foot additional dollar value for this addition over other standard epoxy installations.

NON-SKID ADDITIVE (INCLUDED) White aluminum oxide non-skid additive will be broadcast into the floor. Some competitors will not add Non-Skid additive in their quote but make it an extra. Performance makes this a standard due to the fact that it will give you a safer floor system. We estimate the costs and value at $.03 square foot additional dollar value for this addition over other standard epoxy installations.

OPTIONAL INSTALLATION SERVICES (Commercial Use)
AISLE STRIPING - If you desire, we propose to tape off the floor and apply 20 mils of Performance Epoxy-Coat High Wear Chemical Resistant Cycloaliphatic Epoxy Safety Yellow at an additional cost of $1.20 per linear ft. with a minimum of $300.00.

ADDITIONAL CHARGES
There is an additional charge for each separate mobilization to complete the job (requested by customer), to be determined.

PAYMENT TERMS
  • ONE HALF UPON SIGN UP
  • BALANCE UPON FINAL COMPLETION


NOTE: Specified above is the best form (Cycloaliphatic Epoxy) of 100% solids epoxy for floor coating. This product will wear longer, offer better chemical resistance, resist yellowing better, resists sweating and cure harder than polyamide, aliphatic, amido-amine, etc. epoxies which have less performance qualities. To compare our Epoxy-Coat with substandard products is not a fair comparison. Although we use to sell lesser quality epoxies for customers self installations, we will not install nor warranty them any longer. We estimate the costs and value at $.12 square foot additional dollar value for this type of epoxy over other substandard epoxy installations.

WARRANTY GET QUOTE NOW BACK

Acid Stain Floor Coating Installation Specifications
Acid Stain Floor Coating
We are pleased to quote the following cost for the preparation and coating of your concrete floor area.

SURFACE PREPARATION
  1. Sweep and/or power wash concrete surface.

COATING SYSTEM
Performance Acid Stain
Performance High Wear Clear Sealer

CRACK\EXPANSION JOINT\HOLE FILLING (OPTIONAL)
We will fill the cracks and expansion joints with Performance Crack and Joint Filler.

NON-SKID ADDITIVE (OPTIONAL)
White aluminum oxide non-skid additive will be broadcast into the floor.

ADDITIONAL CHARGES
There is an additional charge for each separate mobilization to complete the job (requested by customer), to be determined.

PAYMENT TERMS
  • ONE HALF UPON SIGN UP
  • BALANCE UPON FINAL COMPLETION


WARRANTY GET QUOTE NOW BACK

Micro Finish Floor Coating Installation Specifications
Micro Finish
We are pleased to quote the following cost for the preparation and coating of your concrete floor area.

SURFACE PREPARATION
  1. Acid etch and power wash.

COATING SYSTEM
PRIME - Install thin set material
FINISH - Micro finish installation.
FINISH 2 (Optional) - 2nd coat of Micro finish installation if necessary - 1\16"

CRACK\EXPANSION JOINT\HOLE FILLING (OPTIONAL)
We will fill the cracks and expansion joints with Performance Crack and Joint Filler.

NON-SKID ADDITIVE (OPTIONAL)
White aluminum oxide non-skid additive will be broadcast into the floor.

ADDITIONAL CHARGES
There is an additional charge for each separate mobilization to complete the job (requested by customer), to be determined.

PAYMENT TERMS
  • ONE HALF UPON SIGN UP
  • BALANCE UPON FINAL COMPLETION


WARRANTY GET QUOTE NOW BACK

1/4" Stamped Overlayment Floor Coating Installation Specifications
Stamped Overlayment Floor Coating Installation
We are pleased to quote the following cost for the preparation and coating of your concrete floor area.

SURFACE PREPARATION
  1. Acid etch and power wash.

COATING SYSTEM
PRIME - Performance thin finish base coat.
INTERMEDIATE 1 - Performance thin finish bond coat.
INTERMEDIATE 2 - Performance 1\4" texture pave colored throughout.
FINISH 1 - Multi coats of various ultra stone concrete stains (approx. 3-5 coats).
FINISH 2 - Performance methacrylate base sealer.
FINISH 3 - Performance methacrylate base sealer.
FINISH 4 - Performance methacrylate base sealer with shark grip slip resistant additive 1\4".

CRACK\EXPANSION JOINT\HOLE FILLING (INCLUDED)
We will fill the cracks and expansion joints with Performance Crack and Joint Filler.

NON-SKID ADDITIVE (INCLUDED)
White aluminum oxide non-skid additive will be broadcast into the floor.

ADDITIONAL CHARGES
There is an additional charge for each separate mobilization to complete the job (requested by customer), to be determined.

PAYMENT TERMS
  • ONE HALF UPON SIGN UP
  • BALANCE UPON FINAL COMPLETION


WARRANTY GET QUOTE NOW BACK

Concrete Polishing Specifications

We are pleased to quote the following cost for the preparation and coating of your concrete floor area.

CONCRETE POLISHING SYSTEM
Entire area to be diamond ground in a minimum of 7 multiple layers (up to an 1200 grit diamond grind) with Eucosil (sodium silicate) application (This is used to crystallize the calcium in the concrete to make it harder)

OPTIONAL INSTALLATION SERVICES (Commercial Use)
AISLE STRIPING - If you desire, we propose to tape off the floor and apply 20 mils of Performance Epoxy-Coat High Wear Chemical Resistant Cycloaliphatic Epoxy Safety Yellow at an additional cost of $1.20 per linear ft. with a minimum of $300.00.

ADDITIONAL CHARGES
There is an additional charge for each separate mobilization to complete the job (requested by customer), to be determined.

PAYMENT TERMS
  • ONE HALF UPON SIGN UP
  • BALANCE UPON FINAL COMPLETION


Our company desires that the customer is satisfied with his understanding of the work and experience with our company. We look forward to a very happy long-term relationship with you in the future. If there are any problems or concerns you may have, I urge you to call me at (800) 841-5580 x 23. Thank you for your time and the opportunity to quote your requirements.

GET QUOTE NOW BACK

Standard 1/4" Overlayment Epoxy Floor Coating Installation Specifications

We are pleased to quote the following cost for the preparation and coating of your concrete floor area.

SURFACE PREPARATION
  1. Entire new area to be diamond ground and/or shotblasted with a Blastrac shotblasting machine. The Blastrac shotblasting machine is designed to specifically reduce noticeable blast lines where other blasting equipment is not designed to do so. All coated area will be sanded and/or diamond ground prior to coating. Entire area to be magnetically swept to remove all spent shot.

  2. Entire wall area to be hand ground.

  3. Entire area to be swept and/or power blown prior to coating.
COATING SYSTEM
STEP 1: Performance E-300 100% solids epoxy primer.

STEP 2: Performance E-330 100% solids epoxy power troweled.

STEP 3: Performance Epoxy-Coat High Wear Chemical Resistant Cycloaliphatic Epoxy

STEP 4: Performance Epoxy-Coat High Wear Chemical Resistant Cycloaliphatic Epoxy Nominal 1\4"

CRACK\EXPANSION JOINT\HOLE FILLING (INCLUDED)
We will fill the cracks and expansion joints with Performance Crack and Joint Filler.

NOTE: Most competitors will not add crack\expansion joint\hole filling in their quote but make it an extra. Performance makes this a standard due to the fact that it will give you a better flooring system with a monolithic look. Cracks, expansion joints, and holes are more noticeable with a high gloss application. Debris will also imbed itself into these crevices if not patched. Please note that with the movement of concrete some cracks may re-appear (especially in expansion joints) but the coating will not peel from those areas and the crack usually are much less noticeable in these instances. We estimate the costs and value at $.11 square foot additional dollar value for this addition over other standard epoxy installations.

NON-SKID ADDITIVE (INCLUDED) White aluminum oxide non-skid additive will be broadcast into the floor. Some competitors will not add Non-Skid additive in their quote but make it an extra. Performance makes this a standard due to the fact that it will give you a safer floor system. We estimate the costs and value at $.03 square foot additional dollar value for this addition over other standard epoxy installations.

OPTIONAL INSTALLATION SERVICES (Commercial Use)
AISLE STRIPING - If you desire, we propose to tape off the floor and apply 20 mils of Performance Epoxy-Coat High Wear Chemical Resistant Cycloaliphatic Epoxy Safety Yellow at an additional cost of $1.20 per linear ft. with a minimum of $300.00.

ADDITIONAL CHARGES
There is an additional charge for each separate mobilization to complete the job (requested by customer), to be determined.

PAYMENT TERMS
  • ONE HALF UPON SIGN UP
  • BALANCE UPON FINAL COMPLETION


NOTE: Specified above is the best form (Cycloaliphatic Epoxy) of 100% solids epoxy for floor coating. This product will wear longer, offer better chemical resistance, resist yellowing better, resists sweating and cure harder than polyamide, aliphatic, amido-amine, etc. epoxies which have less performance qualities. To compare our Epoxy-Coat with substandard products is not a fair comparison. Although we use to sell lesser quality epoxies for customers self installations, we will not install nor warranty them any longer. We estimate the costs and value at $.12 square foot additional dollar value for this type of epoxy over other substandard epoxy installations.

WARRANTY GET QUOTE NOW BACK

  • Do-it-yourself EPOXY-COAT™ kits sales and support.
  • Surface preparation including shotblasting/scarifying/diamond grinding/power scrubbing.
  • Equipment Rental


Industrial/Commercial/Institutional/Residential concrete floor applications including:

  • Concrete Staining
  • Concrete Overlayments (various stamped concrete textures)
  • Rubberized coatings
  • Epoxy coatings from 16 mils Dry Film Thickness to 1/4" (250 mils Dry Film Thickness Overlayments)
  • Conductive Systems
  • Chemical Resilient Systems
  • Permanent Industrial Tile System patented
  • VOC/USDA/ FDA Compliant Coatings
  • Smooth / Orange peel / Non-skid
  • Cove Base & Containment Applications
  • Simulated terrazzo epoxy coatings
  • Epoxy quartz coatings
  • 1/4" epoxy overlayments
  • Concrete patching
  • Concrete polishing


The above flooring solutions are ideal in the following environments:
  • Warehouse & Storage / Food Processing / Laboratories
  • Retail Stores / Service Garages / Auto Dealers / Institutional
  • Heavy Manufacturing / Chemical Storage / Machine Shops
  • Clean Rooms / Show Rooms / Food Processing Plants /Commercial Kitchens




Home Services
Products
Success Stories
Warranty/Other
Photo Gallery's
Flooring Color Options
Contact Us
General Info..

COMMERCIAL - INDUSTRIAL - INSTITUTIONAL - RESIDENTIAL
Performance Floor Coating and Paint Epoxy Applicators are Headquartered in Mount Clemens, Michigan but service the entire continental United States.
International Services & Representation, Performance Floor is an International Company Commercial/Industrial Concrete Paint - Wholesale Epoxy Coating Industrial - Garage Floor Paint If you are searching for Commercial Concrete Paint, Wholesale Epoxy Coating or Industrial Garage Floor Paint. Performance Floor is the Company that can help! © 1981 - Performance Floor Coating Systems, INC.



Site Designed by Livingstondirect Web Design Services of Michigan Web Design | Web Site Maintenance | Web Hosting | Search engine optimization (SEO) | Domain Name Registration | Search Engine Submission